LOCTITE® 243™ is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools.Particularly suitable for applications on less active substrates such as stainless steel and plated surfaces, where disassembly with hand tools is required for servicing.

LOCTITE® 401 is designed for the assembly of difficult - to - bond materials which require uniform stress distribution and strong tension and/or shear strength. The product provides rapid bonding of a wide range of materials, including metals,
plastics and elastomers. LOCTITE® 401 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.

LOCTITE® 609 is designed for the bonding of cylindrical fitting parts. Typical applications include rotor to shafts in fractional and subfractional horsepower motors. Locks bushings and sleeves in housings on shafts. Augments press fits.

LOCTITE® 406 is designed for bonding of plastics and elastomeric materials where very fast fixturing is required.

LOCTITE® 565 is designed for the locking and sealing of metal pipes and fittings. 

LOCTITE® 567 is designed for the locking and sealing of metal tapered threads and fittings.

LOCTITE® Silver Grade Anti-Seize Lubricant is a heavy-duty, high-temperature anti-seize thread compound applicable for heavy pressure applications. It can be used in high temperature areas up to 870°C (1600°F).

LOCTITE 262 High/Med Strength Torque Tension Threadlocker, Breakaway torque 22Nm

LOCTITE® 603 is designed for the bonding of cylindrical fitting parts, particularly where consistently clean surfaces cannot be assured. Typical applications include retaining roller bearings or oil impregnated bushings into housings.

LOCTITE® 277 is designed for the permanent locking and sealing of threaded fasteners. Typical applications include the locking and sealing of large bolts and studs (M25 and larger).

LOCTITE® 515™ cures when confined in the absence of air between close fitting metal surfaces. It seals close fitting joints between rigid metal faces and flanges and will flex with minor flange movements. Provides resistance to low pressures
immediately after assembly of flanges. Typically used as a form-in-place gasket for pumps, thermostats, compressors, transmission housings and axle covers.

LOCTITE® 290 is designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need to disassemble prior to application. The product can also fill porosity in welds, casting and powder metal parts.